Stump Grinders/Trenchers
Baumalight 1P24 Stump Grinder
The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1 3PH. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24″ Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10″ above ground and 6″ below ground with the cutting wheel speed of 540 RPM. A stump of 30″ width and 12″ depth can be ground in 15 mins with a 40HP tractor, with 30HP it takes around 20 mins.
Recommended HP: 20-45
Max. PTO Hp: 40
# of Remotes: 0
Swing Arc: 0 deg
Click Image for more Info
Baumalight 3P24 Stump Grinder
The 3P24 PTO stump grinder is designed for tractors equipped with a 30–50 horse power motor allowing you to grind into stumps with a 24″ rotor carrying 34 replaceable carbide teeth. The cutting and lifting cylinders are powered by your tractor’s hydraulic remotes. Two remote hydraulics are required (if you only have one set then a S1050 valve kit is available to ship with the stump grinder). This versatile PTO Stump Grinder has a cutting depth of 18″ above ground and 8″ below ground.
Recommended HP: 25-50
Max. PTO Hp: 55
# of Remotes: 1 or 2
Swing Arc: 65 deg
Click Image for more Info
Baumalight 3P34 Stump Grinder
The 3P34 PTO stump grinder is designed for tractors equipped with a 50–80 horse power motor allowing you to grind into stumps with a 34″ Rotor carrying 54 replaceable carbide teeth. The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor.
Designed for Cat 2 3PH and 540 PTO this versatile stump grinder has a cutting depth of 25″ above ground and 14″ below ground.
Recommended HP: 45-80
Max. PTO Hp: 75
# of Remotes: 1 or 2
Swing Arc: 65 deg
Click Image for more Info
Baumalight 3P40 Stump Grinder
The 3P40 HPR PTO stump grinder is designed with high performance in mind, for tractors equipped with a 60–120 HP and 1,000 RPM PTO.
his Stump Blaster has the ability to grind a 24″ stump in a few minutes with a cutting depth of 25″ above ground and 14″ below ground. A stump of 30″ width and 12″ depth can be ground in 2 mins with a 120HP tractor, with 90HP it takes around 3 mins and 80 HP takes 4 mins to finish the work
Recommended HP: 60-120
Max. PTO Hp: 115
# of Remotes: 1 or 2
Swing Arc: 65 deg
Click Image for more Info
Baumalight TN336 Trencher
Rural property owners, landscapers or profesional contractors can quickely cut trenches up to 36” deep and between 4” to 6” wide, depending on the chain option. The TN336 Trencher is powered by a planetary drive system. With no roller chain to worry about,
Trench Depth: 36″
Trench Width: 4-6″
Horsepower: 40-100
Direct Drive
Click Image for more Info
Baumalight TN548 Trencher
Quickly and safely bury valuable cables and utility lines underground and out of harm’s way. The TN548 Trencher will easily cut trenches up to 48” deep and between 6” to 10” wide, depending on the chain option
Trench Depth: 48″
Trench Width: 6-10″
Horsepower: 40-100
Direct Drive
Click Image for more Info
